Zlatty
02-27-2008, 10:34 PM
I got my new Bosch blades in today.
First off, massive :blink::blink::blink: at Amazon and how they ship such small items. I kid you not:
http://farm4.static.flickr.com/3250/2296335983_143b9944ac.jpg (http://www.flickr.com/photos/zlatko/2296335983/)
Anyway, I got the blades, as you guys suggested:
http://farm4.static.flickr.com/3138/2296336299_ca169b5573.jpg (http://www.flickr.com/photos/zlatko/2296336299/)
I wanted to take a break from work (I'm hacking from home today) so I went down and tried to put them on. I RTFM before stepping down.
The manual says:
1. Switch off the engine
2. Fold the wiper arm completely out from the windshield
3. Position the wiper blade at an angle and pull the release spring
4. Fold the wiper blade down and unhook it toward the windshield
5. Pull the wiper blade past the wiper arm toward the top
6. Insert a new wiper blade and apply pressure until you hear it engage.
Now in step 3. The little thing that is connected to the release spring snapped off ... little piece of plastic. How the heck do I remove my old blade then? I'm such a n00b ... I don't even remembering putting blades on my Buick ... :(
PS: Anyone know of a good maid service in atlanta?
http://farm4.static.flickr.com/3290/2297132106_b4258219b2.jpg (http://www.flickr.com/photos/zlatko/2297132106/)
First off, massive :blink::blink::blink: at Amazon and how they ship such small items. I kid you not:
http://farm4.static.flickr.com/3250/2296335983_143b9944ac.jpg (http://www.flickr.com/photos/zlatko/2296335983/)
Anyway, I got the blades, as you guys suggested:
http://farm4.static.flickr.com/3138/2296336299_ca169b5573.jpg (http://www.flickr.com/photos/zlatko/2296336299/)
I wanted to take a break from work (I'm hacking from home today) so I went down and tried to put them on. I RTFM before stepping down.
The manual says:
1. Switch off the engine
2. Fold the wiper arm completely out from the windshield
3. Position the wiper blade at an angle and pull the release spring
4. Fold the wiper blade down and unhook it toward the windshield
5. Pull the wiper blade past the wiper arm toward the top
6. Insert a new wiper blade and apply pressure until you hear it engage.
Now in step 3. The little thing that is connected to the release spring snapped off ... little piece of plastic. How the heck do I remove my old blade then? I'm such a n00b ... I don't even remembering putting blades on my Buick ... :(
PS: Anyone know of a good maid service in atlanta?
http://farm4.static.flickr.com/3290/2297132106_b4258219b2.jpg (http://www.flickr.com/photos/zlatko/2297132106/)