PDA

View Full Version : Port and Polished my intake and exhuast


Kelleyo
01-25-2008, 08:22 PM
:blink::blink::blink::blink: OMG

http://www.audiforums.com/m_693578/tm.htm
I've had a chip for a while and wanted to get more performance. I was recommended to port and polish the intake and exhaust. We found out they used abrasive material to do it like gritty sand. So I got with my friend that tunes Hondas and we decided to try it ourselves. We got a bag of sandblasting sand and hooked up into the intake and started the car. We had to hold the gas so it would run. He wanted to let the engine suck in the sand through the intake so it would port it out and then push it out the ehxaust so it would port the exhaust manifold.
I was worried that it might cause problems but he figured it'd be OK as long as we didn't make boost and it get sucked in the turbo. After running the car and letting it suck in sand we got about half way through a 25 lb bag. The check engine light was on and the engine was bucking and kicking and sounding really weird. We stopped and hooked the car back up normal and took off the sand supply. We tried to start it again and it was really hard. Once started it couldn't idle and kept making weird noises. We took it out and drove it and it started to make scraping and knocking noises.
Help! Can anyone tell me what to do! My buddy only does Hondas so he doesn't know much about Audis.

:oops::oops::oops:

88e28
01-25-2008, 08:33 PM
No help here, Just call one of our shop sponsors. I see your in Marietta stop by our sponsor in Marietta German Auto Repair. See banner above.

Mitch
01-25-2008, 09:00 PM
Hmm good question, certainly one of our sponsors can help!

Kelleyo
01-25-2008, 09:19 PM
ummm guys... click on the link in my post.... :icon18:

Mitch
01-25-2008, 10:43 PM
DOH! Dang that was funny! Good one Kelley!

88e28
01-25-2008, 11:00 PM
Just a Joke, See how we tried to help anyway.

Kelleyo
01-26-2008, 01:30 PM
Yes thanks for being helpful and not ridiculing!! Did you see how the guy on the Audi site got trashed!

LOL

88e28
01-26-2008, 01:33 PM
Thats what I like about this site no bashing. If it starts we nip it in the but.:nono:

Barney
01-31-2008, 05:47 PM
I suppose the thread with blades welded on a turbo will appar soon, hope not!

Paltteest
04-17-2011, 07:48 PM
future lyxeg
--
Causes Of Smelly Urine (http://oiki-deacuarot.blogspot.com)